There are ways to configure wake-on-LAN to work via a magic packet sent from outside your home network via the Internet, but there are additional security considerations to factor.
Open UDP port 9 in Windows Firewall - to do this,.Write both your MAC address and IP address down and use them in the next section.Computer Name The easiest way to send a WOL magic packet to the right destination is to reference the computer name (jack-laptop).You can also find it by right-clicking on the Start dji drone sweepstakes screen, choosing All Apps Control Panel Windows System Device Manger.Note you may have to click Change settings that are unavailable at the top.Send a Magic Packet, any device connected to your local area network can send a magic packet.First, you must enter your bios to find and enable the 'Wake on LAN' feature if you have some integrated Ethernet network card.Now, Wake-on-LAN feature should be working on your.If you are having trouble with this tutorial, try some of these fixes: Disable Fast Startup, one of Windows 8s claims to fame is its fast startup, which uses a hybrid shutdown similar to hibernation whenever you turn off your computer.In the upper-right pane, click on the Ethernet connection.Win X keys together to bring up the Power Users menu: Click the Device Manager item.Notes and Troubleshooting, wake-on-LAN can be a little bit finicky, depending on how your system is built and configured.If you do not see this option in your bios, check motherboard vendor manual to see if it supports Wake-on-LAN feature.Boot into Windows 8 and press.Read on to learn how to set it up in Windows.
Navigate to the Components - Network - Adapter and look for the MAC address line of your adapter: Tip: Select the line on the right and press CtrlC on the keyboard.
I hope this article is helpful for you.




[L_RANDNUM-10-999]